10_FS_APP_Commissioning_EN von HR Admin | Jan 19, 2023 Welcome to the 10_FS_APP_Commissioning_EN test! Vorname Familienname E-Mail Which app must be used for commissioning? Huawei FusionSolar Install Wizzard Huawei Smart Design Huawei FusionSolar App Huawei App Gallery Where can I download the FusionSolar app? Huawei App Gallery Apple App Store Google Playstore SKE Homepage -> Huawei App Gallery -> FusionSolar App Which components are commissioned and configured using the FusionSolar app? Inverter Battery storage Smart Power Sensor PV Module Optimizer Smart Dongle WLAN-FE What recommendations does SKE have for an installer who does not yet have a FusionSolar account? The installer should create the account himself at: www.fusionsolar.huawei.com The installer can ask in his company if there is already someone who has a FusionSolar account and have this person create an account for him. Have him contact Huawei. It is to contact SKE so that the account is integrated in the SKE structure. Which points must be fulfilled in order to start commissioning via FusionSolar App? The PV strings are connected and the DC switch is in the "ON" position. The AC power cable is connected to the inverter All communication cables (shielded, twisted pair) are connected (from: Luna, Smart Power Sensor, cascaded inverters) The Huawei optimizers are always detected, there is no need to ensure sufficient sunlight. The DC power cables to the Luna are connected and the DC switch of the Luna is in "ON" position Which statements are correct? The Huawei inverters must be connected to the Internet, otherwise they cannot produce. Before opening the FusionSolar app for commissioning, I connect my smartphone to the inverter's WLAN signal (named: SUN2000_serialnumber) The password for the WLAN signal of the inverter is 0000a, unless there is another password on the nameplate. The password for the WLAN signal of the inverter is "Changeme", unless there is another password on the type plate. What is the inverter password in the FusionSolar app for the "Installer" role? The inverter password must be set, when connecting to it for the first time. For older inverter software versions, the default password is: 12345 The default password is: aaaaa0 The inverter password must be set, when connecting to it for the first time. For older inverter software versions, the default password is: 00000a The default password is: abcde Which statements about "quick settings" are correct? Cascaded inverters are automatically detected if the wiring is correct. Luna working mode "Maximum self consumption" follows the following energy flow prioritization: 1) Consumers of the house 2) Charge Luna 3) Feed surplus into the grid. When using an Ethernet cable for the internet connection, the cable can be connected directly to the inverter. The single-phase inverters (2-6KTL-L1) have an integrated WLAN antenna, therefore they do not require a Smart Dongle for internet connection with the FusionSolar Monitoring Portal. Which important settings can be made in the app in the "Maintenance" area once I am connected locally to the inverter? Software Updates. Under: Maintenance -> Device Update Download LOG files. Under: Maintenance -> Log management Reset the inverter to factory settings. Under: Maintenance -> Restore factory settings Change the color scheme of the LEDs on the inverter. Under: Maintenance -> LED display Which important settings can be made in the app once I am connected locally to the inverter? Activate the off-grid mode (required when using the backup box) Under: Settings -> Function parameters -> off-grid mode Export a report with all parameters set, for submission to the network operator. Under: Settings -> Parameter report If a power meter is used, a “export limitation to the grid”/”dynamic active power limitation” can be activated. Under: Power adjustment -> Grid-tied point-control Which statements about "FusionSolar Monitoring Portal" are correct? That the plant can be created in the FusionSolar Monitoring Portal, the inverter must be connected to the Internet. The correct sequence is: 1) local commissioning of the inverter with the FusionSolar APP 2) creation of the plant 3) creation of a FusionSolar account for the plant owner. The creation of the plant and the FusionSolar account for the plant owner is only possible with the FusionSolar App. It is not possible in the web browser. To create the plant and the FusionSolar account for the plant owner, my smartphone needs an internet connection and I need to be logged in with my FusionSolar account. Who needs to create the FusionSolar system owner account for the end customer? The Huawei Support The end customer itself The SKE Support The installer of the plant How many plants can be assigned per FusionSolar plant-owner account? One plant per account. The installer can assign any number of plants to the plant-owner. Max. 10 plants per account The installer cannot assign plants to the plant-owner. Which statements about "Creating a FusionSolar plant-owner account" are correct? One e-mail address can be used for multiple FusionSolar accounts. The username should not contain the email address, because the email address can be changed later but the username cannot be changed anymore. A plant owner may also have an account with the authorization level "Installer ". An account with the authorization level "Installer " can change sensitive settings of the plant (e.g.: grid code, export limitation, ...). Time is Up! Time's up
Recent Comments